CYCLONE FILTER
CYCLONE FILTER
Cyclone filter separates the particles from the air by forcing the air with “spin method”. The spinning air “pushes” solid particles to outer side of the airflow and provides the particles to fal outside the air flow and settle there. Cyclone collectors are generally used as separator for coarse dust from ait flow and often as pre-deaner before an efficient fiter and/or a product separator.
The poluted air getting in from the entrance on upside of the cyclone with high speed, is forwarded to cyclone intemal wals with centrifugal force of particles whose density is higher than the conveyer atmosphere, by giving it a helicalflow form through cyclone construction.
Cyclones also reduces dust load reaching the filter by operating as first stage dust ejector before the filter on systems where dust load is high. By this means, it becomes possible to used filter unit more efficiently. These filters can be connected in series according to capacity calculations when it is necessary.
Description
• On CBRN filtration system the dust particles within the drawn air are separa-ted by giving ‘‘spin motion’’(both circular and vertical motion) to air flow.
• When it is used before the filters, it extends the filter life.
• High capacities can be provided by parallel connection.
| Filter Type | Filter Dimensions (diameterxsize) | Usage Type | Efficiency |
|---|---|---|---|
| Small Type | 19mm x 66mm 0.75” x 2.6” | Single | 92-96% |
| Serial | 95-99% | ||
| Wide Short Type | 38mm x 102 mm 1.5” x 4” | Single | 88-94% |
| Serial | 90-96% | ||
| Wide Long Type | 38mm x 152 mm 1.5” x 6” | Single | 92-95% |
| Serial | 96-98% |
